Neural and serverless NGRS/school intercom with 1 emergency call release via push-button secured behind glass and 3 call buttons for organisational tasks. Displays for device "in operation" and microphone "active".
The emergency call stations can be used in schools, educational establishments or public buildings and are suitable for triggering an emergency call or amok alarm, communicating with help centres, acoustic warnings or instructions.
Can be used with a separate flush-mounted or surface-mounted housing, either as a flush-mounted or surface-mounted device.
| Front | Foil surface in aluminium design (Autotype F150), resistant to disinfectants |
|---|---|
| Network protocols | IP, TCP, UDP, ARP, IGMP, SIP, RTP, HTTP, TFTP available as add-on: SNMP |
| Operating system | ellan:RTOS |
| Frequency range | depending on codec, limited by loudspeaker - G711 / 3.4 kHz - G722 / 7 kHz available as add-on: - PCM32 / 15 kHz - PCM44 / 21 kHz |
| Energy consumption | max. 4 W (without additional amplifier) |
| Operating voltage | PoE / Class 0 |
| Ambient temperature | -20 °C to +50 °C |
| Loudspeaker | Full-range loudspeaker, 8 Ohm Sound pressure: 1 W / 1 m - 94 dB |
| Microphone | Directional characteristic: omnidirectional -65 dB +/-3 (0 dB = 1 V/pa 1 kHz) Speaking distance up to 8 m (depending on room and ambient acoustics) |
| Amplifier power | A-amplifier: 1.5 W / 8 Ohm; 2.5 W / 4 Ohm B-amplifier (optional): 25 W |
| Dimensions | (H x W x D) 248 x 122 x 7 mm (front panel) |
| Protection class | IP 54 |

Plastic surface-mounted housing to accommodate a NeuroKom® call station type WS 900.
Push-outs for cable glands on the rear. Pre-punched cable…
AG 900-GR

Flush-mounted housingMetalSuitable for WS 900 series flush-mounted intercom stations
UG 900

Flush-mounted housingMetalSuitable for the WS* series flush-mounted intercom stations listed belowReduced installation depth
UG 901

Key module11 destination/selection buttonsLabelling fieldsSupplement for DS/WS 900 series intercom stations
TS 908-11

Cavity wall mounting kitSuitable for flush-mounted box type UPK 10, GL UG, UG 90 and UG 900
HWM-UPK10/UG900